Heavy Duty 20" Band Saw

Click here to view the full brochure for this machine


Advanced Design --- Northfield Band saws undergo a constant process of testing and refinement to maintain the highest standards of precision, speed, dependability, appearance, and value.

Quality Manufacture --- Northfield band saws are built to exacting quality standards in every detail. They are solid, smooth-running machines. Each band saw is electronically balanced for vibration-free performance.

Heavy Duty Frame --- High strength cast iron frames with wide, ribbed feet give a solid stance, and smother vibration.

Machined and Ground Tables --- Tables are thick and heavily ribbed - machined and grounded - equipped with removable, replaceable table inserts.

Heavy Table Rocker --- Oversize cast iron table rocker assures positive locking at any angle.  Table tilts by means of screw and nut tilting device.


Wheel Face 1-3/8"
Table Size 25" x 25"
Front Edge of Table to Teeth of 3/8" Blade 9-1/2"
Capacity Under Guide 14"
Table Tilts to Right 45 degrees
Table Tilts to Left 10 degrees
Horizontal Capacity 19-1/2"
Table Height 39-1/2"
Wheels Aluminum Disc
Brake Lower Wheel Foot Operated
Guides Carter CP Size 0
Blade one 3/8" furnished
Voltage 208-22-/440-550
Circumference of 20" Wheel is 5.236 ft.
Direct Motor Drive 2 HP - 900 RPM
HP and RPM

2 HP - 1200 RPM

3 HP 900 RPM

3 HP 1200 RPM

5 HP 1200 RPM

Belt Drive 2 and 3 HP
HP and RPM Any Single RPM from 300 to 1200
Height 75"
Floor Space 24" x 36"
Domestic Shipping Wt 950 lbs.
Export Shipping Wt 1200 lbs.
Cubic Export Crate Size 74 Cu. Ft.
3 Phase Standard



Left hand machines, two wheel foot operated mechanical brakes, upper and lower automatic electric brakes, 18, 24 & 36 inch under guide, constant speed belt drive assemblies, 3 to 1 variable speed drive assemblies, Nema 12 electrics, work light, 24 or 110 volts at pushbutton, miter gauge with square slot, miter gauge with dovetail slot, single face rip fence, double face rip fence, switch for stopping power upon application of foot brake, blade welders, air nozzles, hand resaw attachments, paddock guides, Wright guides, rolling tables, circle cutting attachments, single phase belt drive motors.