Click
here to view the full brochure for this machine
| Nominal Size: | 24" x 6" |
| Cylinders: | 5" Cutting Circle, 4 Knife Helical Carbide Cutterhead |
| Drive: | Vee-Belt |
| Motors: |
Upper Cutterhead - 20 hp to 40 hp Lower Cutterhead - 15 hp to 30 hp Feed - 5hp Variable Speed with Gear Reducer Platen Elevation - 1 hp Grinder Motor - 1/10 hp |
| Central Distance Between Cutterheads: | 56" |
| Voltages: | 208-575, 3-phase, 50-60 Hz |
| Lower Feed Rolls: | 4" Solid Steel, Power Driven Sealed Bearings |
| Upper Feed Rolls: |
Infeed - 4" Diameter 2" Milled Ductile Sections 3/16" Section Yield 3/4" Roll Yield Sealed Bearings Outfeed - 4" Solid Steel, Power Driven, with Sealed Bearings |
| Table Feed Roller Adjustment: | Independent Control .001 to .100 |
| Feed Speed: | 25 to 100 Lineal Feet per Minute (Higher or Lower Available in Same Ratio) |
| Chipbreaker: | 2" Sections, Concentric with Head |
| Pressure Bar: | Easily Adjustable - Concentric with Head |
| Maximum Stock Width: | 24" |
| Shortest Butted Piece: | 6" |
| Shortest Single Piece: | 12" |
| Maximum Stock Thickness: | 6" |
| Minimum Stock Thickness: | 1/4" |
| Maximum Depth of Cut: | 1/2" |
| Floor Space: | 79"W x 115"L x 69"H |
| Net Weight: | 12,200 lbs. |
| Domestic Shipping Weight: | 12,500 lbs. |
| Export Shipping Weight: | 13,000 lbs. |
| Cubic Export Crate Size: | 456 cu. ft. |