Heavy Duty Large Top Shaper

Click here to view the full brochure for this machine

Guard, aluminum dust spout & foot brake are standard equipment

Northfield Heavy Duty Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. The 44" x 72" table provides room for mounting feeders and gives full support for large jigs and fixtures. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided. Under table dust outlet improves dust & chip extraction.

Specifications

Diameter of Spindle (standard machine)	1"
Vertical Adjustment of Spindle	4-1/2"
Length of Spindle at Collar	5"
Size of Table	44" x 72"
Height of Table Top	37"
Spindle Speed	8,000 RPM
Spindle Rotation	Counterclockwise
Size of Dust Spout	4" - 4" dust spout requires approx. 400 CFM air flow for dust collection
Horsepower	3, 5, 7-1/2, 10, 15 TEFC
Size of Throat Hole	4-1/2"
Floor Space	72 width x 48 deep
Domestic Shipping Weight	2700 lbs.
Export Shipping Weight	3100 lbs.
Cubic Measure Export Boxed	104 cu. ft.
Voltages	208, 230/460, 575 3 ph 60 hz

Extras

K-50 fence with hold down springs

Micrometer adjust for K-50 fence

3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles

6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only

8" spindle length 1-3/8, & 1-1/2 solid spindle

Reversing solid spindle with reversing switch

Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"

Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"

Detachable router top 1/2" hole

Collet spindle (3/4" max collet bore)

6000 & 4000 RPM spindle speed

NEMA 12 electrics with fused disconnect

24-volt push-button

Switch to disconnect power upon actuation of brake

Clockwise spindle rotation

Single phase 3, 5, 7-1/2" hp, 220-volt

Throat hole and plates available: 8", 6-1/2" and nested

Digital read-out spindle position

Spindle crank on front of machine

Modifications to customer's order